Redistribution Case 2

Expand all


Redistribution Case 2

Last updated: October 14, 2014


A Note On Section Initial Configuration Files: You must load the initial configuration files for the section, which can be found under the Resources tab.

Redistribution Case 2

  • The network is pre-configured as follows:
    • R1, R2, R3, R4, R5, R8, and R10 run OSPF area 0.
    • R1, R3, R6, R7, and R9 run EIGRP AS 100.
  • Refer to the diagram for specific protocol boundaries.
  • Redistribution is pre-configured as seen below.

router ospf 1
 redistribute eigrp 100 subnets

router eigrp 100
 redistribute ospf 1 metric 1000000 1 255 1 1500

router eigrp 100
 redistribute connected
  • Describe the problem in the topology, and note the possible solutions.

Video Solution


^ back to top